• Products
• News
• Contact
• About Us

Super Hard 1/4" HEX-Bits

The Maximum Bending is controlled to be less than 100µm (.004")

Now, Bokar-Tokoma can deliver to you superior, straight BIT ......TRY BOKAR-TOKOMA, NOW!!

Have you ever damage Tip of your Driver Bits instantly or damaged driving slots on Screw Head?

• The principal Cause of that is BEND on SHANK of a BIT.
  Usually, After heat treatment, every Bit is bent to some extend or bent VERY MUCH.
• But up till now, most Manufacturers are selling bits without PRECISION Grinding to make them STRAIGHT. For example, on 65mm (2½" long) bit, some pieces are bent over 300µm.
• Our bits will give you precision, straight drive of the screws eliminating tip and screw damage.

If the BIT bend MUCH, The Tip must show you the DANCE when Drive it. That is why, The Processing of STRAIGHTEN is VERY IMPORTANT HOW GET STRAIGHT, In order to get better working-condition.

SUPER HARD HEX-SCREWDRIVER-BITS

Specifications

• MAX Torque=25.0Nm‚
• FULLY HARDENED TO TEMPERED to 60 degrees (HRC).
• 100µm as the MAX Bending with checked and modified for Every Piece for less than 200mm long.
• Bit Color Available Gold or Silver from Standard Lines.
• 10-pcs of 65mm's & 110mm's set into Plastic Case for Dust & Rust proof for long time stocking.
• We can work for other any sizes under Your Requirements.

How to Order:

Picture	Part Number	Description	Packing
	SHB222MPG	SuperHard-Gold Phillips(+) 2 Both Sides, 65mm, 2pcs	2-pcs. Bag
	SHB220MPG	SuperHard-Gold Phillips(+) 2 Both Sides, 65mm, 10pcs	10-pcs.Case
	SHB220MP	SuperHard-Silver Phillips(+) 2 Both Sides, 65mm, 10pcs	10-pcs.Case
	SHB240MP	SuperHard-Silver Phillips(+) 2 Both Sides, 110mm, 10pcs	10-pcs.Case
	SHB240MPG	SuperHard-Gold Phillips(+) 2 Both Sides, 110mm, 10pcs	10-pcs.Case
	SHB261M	SuperHard-Silver Phillips(+) 2 Both Sides, 150mm, 1pcs	1-pc. Bag
	SHB281M	SuperHard-Silver Phillips(+) 2 Both Sides, 200mm, 1pcs	1-pc. Bag